MRL lift AR-Slim

Highly efficient MRL traction lift

MRL traction lift
The gearless motor is located in the headroom. AR-Slim Gearless traction lifts are provided with a gearless, VVVF-controlled permanent magnet motor in the headroom. The control panel is located in the top landing door frame or within the shaft.
AR – SLIM Gearless traction lifts comply with EN 81-1:1998+A2:2004+A3:2009 harmonized standards, and comply with 2014/33/EU Lift Directive. They also comply with the requirements of the 2004/108/EC Electromagnetic Compatibility Directive and the 2006/42/EC Machinery Directive, where applicable.

Benefits
This is a space-saving system thanks to the lack of a machine room. The machine is fully contained within the shaft, supported by guide rails. The whole lift load is backed by the car and counterweight guide rails and neither bearing beams to be fixed to the shaft walls nor other builder’s works are required. The service cabinet, next to the top landing door, has a reduced depth and minimum aesthetic impact. Thanks to the gearless motor and the speed frequency control guaranteed by a high quality inverter, high ride quality, noiselessness within the car and building, better system performance, reduced power installation and consumption (also in terms of energy costs), as well as less mechanical stresses and motor temperatures are achieved.

The ideal solution for modernisation

Quick and easy to install, AR-Slim by IGV Group is a highly efficient, cost effective gearless system requiring reduced maintenance. AR-Slim offers up to 3 entrances and it is the ideal solution for the modernisation of old hydraulic lifts. The design is basic and meets the needs of the most demanding customers as it is available in special versions featuring a broad range of accessories and finishes. AR-Slim is the best way to provide an easy access to all levels in shops, offices and hotels.

AR-Slim model with cantilever car sling

Basic features

• Gearless – roping 1:1
• Load: up to 900 kg
• Speed: 1.00 m/s
• Maximum travel: 30 m (up to 50 m with feasibility)
• Headroom 3400 mm min. (3300 mm with feasibility)
• Pit 1200 mm min (1100 mm with feasibility)
• Car entrances: single, 2 opposites, 2 adjacent, 3 entrances
• Compatible with any type of car
• Maximum car dimensions: 1400 x 1500 mm, with 2 adjacent entrances
• Maximum car cantilever: DBG x 2
• Car with 2 panoramic walls (with feasibility)
• Compatible with all types of doors: automatic, semi-automatic, folding
• Compatible with any type of shaft: reinforced concrete, brick, metal shaft structure
• Cabinet 470 x 320 x 2200 mm (h), or 400 x 130 x 2200 mm (h) + cabinet in the headroom
• The cabinet can be installed at any floor
• Electric brake release