Hydraulic rams
TEX DC
Centre type ram
The TEX® DC ram, centre acting type, is extremely versatile. It offers a wide range of diameters available, from 60 to 250 mm, it fits any system type, from the smallest lift to the large size and load goods lifts.
Being located centrally under the car, it allows to use the whole travel shaft surface, by fully exploiting the room available.
The TEX® DC ram is especially suitable for panoramic systems
The exposed part is painted in opaque black with a rust inhibiting primer while the in-ground part is coated with a special coating against corrosion and stray currents.
The standard supply includes
- 1-piece ram
- plate for fixing the swinging car sling
- drop valve
- nylon wire for plumb operation
- connection and pipe for oil recovery
Upon request, the TEX® DC ram can be supplied
- divided into 2 or 3 pieces with threaded joint in order to ease the handling operations and the positioning into the shaft
- with special sized swinging plate
TEX DL
Side acting ram
The TEX® DL side acting ram is especially suitable for lifts with limited travel. It offers a wide range of diameters available, from 60 to 150 mm, the TEX® DL ram allows to satisfy any lift load requirement and when it is tandem used, it provides excellent performance for goods lifts with large car surfaces and high car loads.
The standard supply includes
- 1-piece ram painted in opaque black with a rust inhibiting primer
- plate for fixing the winging car sling
- inferior plate for the fixing on pit bottom
- drop valve
- connection and pipe for oil recovery
Upon request, the TEX® DL ram can be supplied
- with the inferior plate located at a given height in order to partially bury it
- without the inferior plate
- with special swinging plate
- with special painted coating.
TEX TR
Reverse tackle ram
The TEX® TR ram is conceived for reverse tackle type lifts and can be used for systems with travel up to 30 m, meeting almost any kind of load requirement.
The TEX® TR ram, tandem installed, offers excellent performances also for goods lifts with large car surfaces and heavy loads.
The standard supply includes
- 1-piece ram painted in opaque black with a rust inhibiting primer
- drop valve
- connection and pipe for oil recovery
Upon request, the TEX® TR ram can be supplied
- divided into 2 or 3 pieces with threaded joint in order to ease the handling operations and the positioning into the shaft
- with special location pin on the bottom
- with special painting.
TEX SuperSlim
Ram for lifts with reduced pit and headroom
The TEX® SuperSlim ram range features headroom and cylinder with smaller dimensions than standard ones.
These features allow the use of smaller quantities of oil and smaller footprint in the shaft thus reducing the system elasticity.
Designed for reverse tackle systems, the TEX® SuperSlim ram is especially suited for lifts with loads up to 630 kg and 8 persons capacity.
The standard supply includes
- 1-piece ram primed with soft black paint
- drop valve
- connection and pipe for oil recovery
Upon request
- ram divided into 2 or 3 pieces with threaded joint
- centering pin on the black plate
- special painting.
At your service
Explore resources and tools at your service. Stay connected with IGV Group.
